Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
12-3/4" Long x 1/2" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there boat trailer owners. Today, we're going to be taking a look at CE Smith's replacement keel roller rods. And this is what our replacement roller rod's going to look like. These are available in either two different diameters, whether it be five eighths, like we have here or half inch, you just want to match it up to your old one. And they're also available in varying lengths. So that way you can get the proper span for your particular trailer.
And all of them are zinc coated to protect them from rusting corrosion, which is very common on your boat trailers since you're pulling it in and out of the boat dock all the time, you're next to the Lake. They often get wet. So this way we can ensure that we're going to have long lasting operation of this rod, and it's not going to seize up inside of here due to rust and corrosion.Also included with it you'll receive cap nuts for each side of your rod. And these are nice because once you press them on there, they're pretty much a permanent fit, you have to really try to get them off of there. And since this is a roller, it doesn't ever really get forces side to side, but we don't want to use regular thread on nuts on something like this since it does roll.
That could potentially cause the nuts to back off. So this is an ideal solution. If your old keel roller or keel roller rod are worn out and need replacement, the replacement shaft here is going to be a great option for you because it's kind of a one use thing, unless you can get yourself some new cap nuts. And even if you do get new cabinets, if it's heavily corroded and worn down, those cap nuts may not fit as tight and as properly as they used to.So when replacing your keel roller, when it's wore out, I highly recommend also replacing the keel roller rod. The rod is going to be made of solid steel with a zinc coating.
So it's going to be extremely durable holding up the weight that is pressed down from the boat sitting on it there. And the zinc coat is going to protect it against rust and corrosion. If your keel roller is worn out. And that's why you're looking at getting replacements. We also carry the keel rollers here at etrailer.com.
So you can get a set up just like this. You can see how nice and smooth it is, and we've got a nice surface for our boat to rest on.Today we're going to be replacing the keel roller's shaft because our key roller's all damaged up and in order to get the roller off, we have to take the shaft out and the nuts typically get damaged and are not reusable. So we're just going to be replacing it all as an assembly. Start by removing our roller's nuts. We're just going to get behind it with a pair of pliers. We're just going to pop that cap off of there. inaudible 00:02:18. Our shaft will then slide out. We can remove our roller and then install our new components. We've got our shaft here and I find it easier to get one cap nut on first. So we're just going to set that on top and we're just going to hammer it into place. I'm going to use a rubber mallet just to help minimize how much dings I make on the little cap. And it's really that simple. And you can see here, there's no way I'm going to push this off. If I wanted to get this off of here, I would almost have to take another hammer and smash it off of there because you're just not going to be able to pull it off. Now we can just take our roller. We're going to set it into place. Slide our rod all the way through the roller, until it comes out on the other side. We'll then take our cap, we're going to set it into place. Now that we got it just barely started. We're going to finish tapping it on. I'm going to use a hammer on the other side, because it might hurt your hip or something else if you're holding it. And we can see our shaft spins, our roller spins and it's nice and solid, it's not going anywhere. Thought you need a hatchet. And that completes our look at CE Smith's replacement keel roller rods.
Average Customer Rating: 4.8 out of 5 stars (697 Customer Reviews)
12-3/4" Long x 1/2" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.Same as always great quality and fast shipping
Thanks etrailer
Products were as advertised
Shipping was very timely. I would not hesitate to buy future products from them. Very satisfied customer.
etrailer had exactly what I needed! Gentlemen on the phone was very knowledgeable and no problem at all! Very courteous and polite. I will be ordering what I need from these people. I encourage folks to do the same. Products were exact and fast shipping! Fenders perfect, bunk board carpet was a dream to install.?
perfect fit for my older yacht boy trai ler....
Perfect fit to repair bent roller, pin and end cap on 2006Tracker pontoon trailer.
Good products with excellent service and predictable shipping. Will us them again.
Part works as it should received In a timely fashion. Have made several purchases at etrailer highly recommend.
Great product and fast delivery
I needed to keep the stern of my pontoon boat from drifting off of the bunks when trailering and this unit had the same rollers as the Tracker factory rollers. The components are made of durable powder coated steel and are working perfectly after one year.
Everything was perfect and fit just as needed.
After searching other sites for boat trailer parts I decided to order from etrailer because of the wide selection and prices of their products. I quickly received the roller guides and shaft pins I ordered. The parts fit perfectly and were very easy to install. I will definitely use etrailer for all my trailer needs in the future.
I have a CE Smith trailer boat guide-on for about 15 years, and the top cap nut finally came off from road bouncing. The top roller guide was lost. These items allowed me to repair the guide. etrailer.com was quick to ship the parts with a fast carrier.
All 3 items were delivered sooner than expected and seem to be quality items. The roller shaft is a little longer than I needed, but it's not an issue. All in all good service.
A little longer than I needed but not a problem. Solid product.
Searched many locations and only ETrailer.com had the exact part I needed. Perfect Fit! I have never got a bad product from ETrailer.com. Thanks
Very easy to shop with etrailer. Everything they told me about my order and arrival date was spot on. I will tell my friends. I will be shopping with them again.
The order was complete and I was very satisfied with the items and the shipping cost was very reasonable compaired with another company. I'm glad that my wife researched the net to find a cheaper shipping cost.
Snail delivered! Got the box today. Looked like they played soccer with it. My box being the ball. Box was all misshapen and beaten up. Delivery started with UPS then handed over to USPS.
Heather A.
8/22/2022
Oh man, I hate to hear that. Please let us know if you have any damage to your items.
The extra pal nuts I ordered were for 5/8 inch shaft. I needed 1/2 inch. I should have paid more attention to the size. The items I ordered worked well. I just wish I had ordered the 1/2 caps. It just isn't cost effective to send them back and just re-order the others.
I ordered four rollers and a replacement shaft for my boat trailer and I am very pleased with all of it!!
Product was exactly as described and worked perfectly for my repair project!! I would recommend this product.
All items arrived on time. Exactly what I ordered. I will order follow on boat trailer parts later in the season.
One of the few companies that treat you as a customer, not just a consumer. Great customer service, delivery time and fair prices. Have and will continue to order form etrailer. Thanks again.
Received our purchase within 4 days. Excellent prices and reasonable shipping charges. This was the 2nd time we ordered from etrailer, but will not be our last. We will recommend to all our boating friends.
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
10/30/2023
Rollers have worked perfectly and flawlessly